Pressure Control - Regulating Downstream

Our Products / Automated & Control Valves / Pressure Control - Regulating Downstream
  • Elite RELT Micro Pressure Control Valve

  • Elite RELT-SLP micro pressure reducing valves are used for accurate pressure control on tank blanketing systems. They have a large diaphragm which provides greater sensitivity and allows them to control at very low set pressures.

    These valves help control emissions, provide protection against atmospheric contamination and maintain a positive tank pressure which reduces the possibility of tank wall collapse during pump out operations, while preventing stored product from vaporizing to atmosphere.

    Other applications include Semi-conductor Industry, Natural gas distribution Systems and Plant Air services.

    Materials: Body-316SS, Seat/Sealing-NBR, Diaphragm-Nylon-CR/Nylon-Viton
    Pressure Adjusting Range: 0.02-0.2 Bar
    Installation: inverted (adj. bolts faces downward)
    Sizes: 1/2″ (DN15) – 2″ (DN50)
    Connections: threaded BSP or NPT
    Max applied Pressure: 10 bar



  • MK60 Pressure Reducer

  • US manufactured MK60 is the most versatile pressure reducing valve in Jordan’s extensive range of regulating valves. A high quality, long lasting valve which you can safely “set & forget”. Responds rapidly to pressure changes…….better control performance than most self-acting regulators…easily maintained and simple pressure adjustment in situ.

    It is a robust, versatile, self-acting valve that has sliding gate design (rather than conventional piston or plug and seat), has hard wearing Jorcote seats with class IV shut-off and Jorlon long life diaphragm. It is suitable to use with water, oil, gas, chemicals and steam. There are many variations to the basic model such as MK61 (high sensitivity, low droop), MK601/MK602 (high flow version) and MK60HP (high pressure version). In Bronze or DI version, valves have screwed ends BSPT, BSPP or NPT, WCB or 316ss valves can be threaded, socket weld, butt-weld or flanged to Ansi 150/300 or DIN PN10/16/25/40.
    Maximum inlet pressure- BZ (2100 kpa) /DI/WCB/316SS (4,500 kpa).
    Maximum temp- BZ (260°C)/ DI/WCB/316SS (343°C)

    Reduced pressure ranges:

    MK60 (ranges between 14 kpa-1,100 kpa)
    MK61 (ranges between 7 kpa-1,240 kpa)
    MK60HP 1/2″-2″ (ranges between 525 kpa-3,100 kpa)
    MK60HP 2″-4″ (ranges between 207 kpa-760 kpa) MK601/MK602 2” High Cv’s 50/70 (ranges between 140 kpa – 1100 kpa)

    Options: Low flow trim in all sizes, special coated seats, 316SS or Monel diaphragm, cryogenic extension, Oxygen cleaned, salt water trim, Companion flanges for Bronze & DI valves, BSPP ends

     

     

     



  • 3318 Brass Pressure Reducing Valve

  • Model 3318 is a self acting, piston type pressure reducing valve suitable for water, 50% glycol and air.

    Materials: Body-Brass (plated); Piston-PA-66-GF30 (Nylon 66); Seat-303SS; O-rings-EPDM; Other-hot forged brass
    Sizes: ½” – 4″.
    Maximum inlet pressure – 25 bar (362 psi)
    Maximum temp- 130°C
    Reduced pressure ranges: 1/2″-1″ 50-550 kpa; 1¼”-4″ 50-700 kpa

    * Options: Pressure Gauge



  • Model RET Pressure Reducing Valve (316ss, screwed)

  • Elite model RET is a 316SS self acting pressure reducing valve suitable for fluids, air and steam.

    It is available in ½” → 2” (Cv’s from 2.4-25.0) and the main materials are 316SS with NBR or Viton diaphragm and seals. Valve has BSP female threaded ends.

    Maximum inlet pressure-2500 kpa (362 psi)
    Maximum temp- 100°C or 180°C for steam
    Reduced pressure ranges – 100-600 kpa; 400-1,000 kpa; 800-1300 kpa

    * Options: NPT, all 316ss adjusting bolt/locknut, pressure gauge

     



  • Model REF Pressure Reducing Valve (316SS, flanged)

  • Elite model REF is a 316ss self acting pressure reducing valve suitable for fluids, air and steam.

    It is available in ½” → 6” (Cv’s from 2.4-250)and the main materials are 316ss with NBR or Viton diaphragm and seals. Valve has flanged ends which can be drilled to suit Ansi 150# or AS Table D/E.

    Maximum inlet pressure-2500 kpa (362 psi)
    Maximum temp- 100°C or 180°C for steam
    Reduced pressure ranges – 100-600 kpa; 400-1,000 kpa; 800-1300 kpa

    * Options: All 316ss adjusting bolt/locknut, pressure gauge