Pressure Gauges

  • Solfrunt 1981 Pressure Gauge

  • USG Model 1981 Refinery Solid Front Pressure Gauge is ideal for fitting with a high point indicator (lazy hand) as shown in the model pictured. The purpose of this is to indicate any surges or pressures spikes that may occur and damage other equipment.

    Specification: Full safety pattern, solid front rear blowout, black Petra 130 turret case, surface mount, 316ss tube and socket, 115mm diameter, 1/2″ NPT lower connection, ranges from -100/0 to 0/8,000 kpa- accuracy 0.5% of full scale

    * Options: High point indicator (ID2911500), Liquid Filling (only when high point indicator is not used), custom dials, calibration certificate



  • Baroli BD Series Digital Pressure Gauge

  • Battery powered Digital Pressure Gauge with rotatable display module and plastic housing. It is easily operated via three pushbuttons in the touchpad. In addition to showing information about the minimum and maximum pressures of the process, many different units can be displayed (eg Bar, mbar, PSI, mWs, inHg, cmHg, mmHg, Mpa).

    Materials of the standard unit currently stocked 316SS/FKM, Ceramic or 316L Diaphragm, 1/2″ NPT male
    Accuracy: 0.125 / 0.250% of full scale
    Ranges generally stocked:0→160 kpa / 0→400 kpa
    0→0.6 bar / 0→10 bar
    0→400 bar / 0→600 bar

    Refer Data sheet for all ranges available



  • P252-6 (160mm Stainless Steel Pressure Gauge, lower mount)

  • P252-6 Pressure Gauge, 160mm dial, 304ss case, 316ss bourdon tube and connection, laminated safety glass, dual scale (kpa/Psi), ½” NPT lower mount, accuracy +/- 1.0% of full scale, Dry (liquid filled on request)

    Ranges- start -100/0 kpa → 0/160,000 kpa (see data sheet for all ranges available)

    * Options: back flange, liquid filling



  • KPCh (63mm Low Pressure Gauge for Air & Gas, LM or CBM)

  • KPCh Low Pressure Capsule Gauge not suitable for liquids, 304ss case, brass, copper/beryllium & buna-n capsule and connection, acrylic window, scale in kpa only, ¼” BSPT lower (LM) or centre-back-mount (CBM) connections accuracy +/- 1.6% of full scale, Dry

    Ranges- start -60/0 kpa → 0/60 kpa (see data sheet for all ranges available)

    * Options: Back flange, fitted with front flange for panel mounting



  • P252-4 (100mm Stainless Steel Pressure Gauge, lower mount)

  • P252-4 Pressure Gauge, 100mm dial, 304ss case, 316ss bourdon tube and connection, laminated safety glass, dual scale (kpa/Psi), ½” NPT lower mount, accuracy +/- 1.0% of full scale, Dry (liquid filled on request)

    Ranges- start -100/0 kpa → 0/160,000 kpa (see data sheet for all ranges available)

    * Options: Back flange, front flange, liquid filling, rubber boot, polycarbonate lens