Actuated C100 Ball Valve
C100 Ball valves are not direct mountable and a mounting bracket/kit is required to couple to Pneumatic (DA or SR) or Electric Actuators (12vDC, 24vAC, 24vDC, 110vAC 240vAC).Thermoplastic valves are usually mounted with corrosion resistant, plastic Pneumatic Actuators (polyamide series, prefixed PP) but they can also be supplied with actuators made from standard rilsan coated aluminium or 316 Stainless Steel.
In addition to pneumatic actuators, a full range of accessories is also available such as Limit Switches, Pilot Solenoid Valves (Namur & remote mounted), Pneumatic or Electro-Pneumatic Positioner, Filter Regulator and Pressure Gauge, speed controls etc Read More...
Actuated MV310 Diaphragm Valve
Pneumatically Operated Diaphragm Valves can be used for on/off or for controlling flow (positioner required for throttling). Can be used for neutral, aggressive liquids, gaseous media and where abrasive particles are present. Available in the following control functions:-
NC (normally closed)
NO (normally open)
DA (double acting)
3/8” – 2” (DN10-DN50) Rated 10 Bar
2½”-4” (DN65-DN100) Rated 6 Bar
Download MV310 Diaph Valve Actuated
Read More...
Actuated Butterfly Valve
In the majority of cases, our extensive range of Thermoplastic Butterfly Valves can be direct mounted with Pneumatic (DA or SR) or Electric Actuators (12vDC, 24vAC, 24vDC, 110vAC 240vAC). Where direct mounting is not possible, a bracket and extended drive adaptor are used.Thermoplastic valves are usually mounted with corrosion resistant plastic (polyamide) Pneumatic Actuators but they can also be supplied with rilsan (nylon 11) coated aluminium or 316 Stainless Steel.
In addition to pneumatic actuators, a full range of accessories is also available such as Limit Switches, Pilot Solenoid Valves (Namur & remote mounted), Pneumatic or Electro-Pneumatic Positioner Read More...
TK Series Actuated 3-way Ball Valve
TKDLV “L” and “T-Port” 3-way Ball valves are not direct mountable to Pneumatic (DA or SR) or Electric Actuators (12vDC, 24vAC, 24vDC, 110vAC 240vAC) and model PQCE mounting kit is required.Thermoplastic valves are usually mounted with corrosion resistant, plastic Pneumatic Actuators (polyamide series, prefixed PP) but they can also be supplied with actuators made from standard rilsan coated aluminium or 316 Stainless Steel.
In addition to pneumatic actuators, a full range of accessories is also available such as Limit Switches, Pilot Solenoid Valves (Namur & remote mounted), Pneumatic or Electro-Pneumatic Positioner, Filter Regulator and Pressure Gauge, speed controls etc Read More...
