Valves › Control Valve
Series 2301 Globe Style Control Valve (modulating)
Series 2301 is a globe style control valve for modulating service which can be operated by a single or double acting actuator. It can be fitted with top control electro-pneumatic positioned or process controller. Valve is 2-way, normally closed and is available in sizes ½” (Kv0.5) → 2” (Kv27.9) with ends flanged Ansi 150#.
Body material: 316L
Seal material is PTFE/St. Steel or St. Steel / St. Steel
Can be ordered with flow direction above (gas & steam) or below the seat (liquids).
Valve operating pressures: to 16 bar (depends on trim/actuator
Max. pilot pressure : 5.5 -7 bar
Options: Different Control Heads (8692, 8693, 8694,8696), "Element" continuous control (model 8802-GD), equal % seats, normally open valve (see data sheet for all options)
Read More...
Model 4370 Pneumatic Control Valve (BZ/DI/WCB/316SS)
Model 4370 is the Australian made version of US manufactured Mk70, diaphragm operated Control Valve. The valve is metal/metal seated (Ansi class IV) and utilises the same sliding gate seats found in Jordan’s range of Pressure Regulators (4350/4360) and Temperature Control Valves (4380). It is available in sizes ½”→ 2” (Cv 2.5 to 30). The standard valve has threaded (bspt) ends but can be flanged on request. The valve is actioned by a multi-spring pneumatic actuator and can be used for on/off or modulating for liquids, gases, chemicals and steam. Flow is controlled by the movement of the gate/disc which moves in response to a 3-15 psi pneumatic signal received from a controller. Where the signal is in milliamps, an I/P transducer can be fitted (i.e. converts a 4-20mA signal to 3-15 psi) or, for even more precise control, the pneumatic actuator can be fitted with a pneumatic or I/P positioner.
Maximum inlet pressure- BZ (2100kpa) / DI (3,100kpa) / 316SS (4,500kpa)
Maximum temp- BZ/DI (260°C)/ 316SS (343°C)
Max pressure differential: 125-250 psi (without positioner), 125-550 psi with positioner
Options: 43701 Cv 50 High Flow version, equal % seats, low flow seats for all sizes, side or top mounted positioner, flanges to AS or Ansi. Many more options, higher pressure/temps etc for US made Mk70 (see download), flanged MK711
Read More...
MK708 / MK8000 Low Flow Pneumatic Control Valve (WCB/316SS/Monel/Alloy 20)
Jordan MK708 and MK8000 are globe style, low flow, pneumatic control valves, either cast or machined from barstock. They are operated by a multi-spring pneumatic actuator. Top or side mounted positioners are fitted where greater accuracy is required or where high pressure differentials occur. Many combinations of body/trim material available, hard or soft seat (for MK708 when zero seat leakage required)
Mk 708 - ¼”→ ¾” (Cv’s 00001 to 4.0), class IV or VI shut-off, max WP & DP 5,000 psi
Mk 8000 - ½”→ 2” (Cv’s 0.05 to 16.0) class III or IV shut-off, WP to 6,000 psi (414 Bar), Max differential Pressure to 5,000 psi
Options: Mk8000 is avail in almost any exotic material, including PVC and Kynar, also 3-way version
Read More...
MK75 Wafer Body Pneumatic Control Valve (CS/316SS)
MK75 is a wafer body pneumatic control valve, featuring sliding gate design in a lightweight, compact body, dramatically reducing the size and weight of conventional control valves.
Sizes - 1” → 6” (Cv’s 9.5 to 400), Class 150/300
Size- 8” (Cv 400), Class 150
Maximum differential pressures vary, depending on valve size, actuator selected (35M/55M/85M) and whether with or without positioner (see download sheet)
Read More...