5335 DR Bronze Pressure Reducing Valve preset 5bar (AS1357.2 Approved)
Caleffi model 5335 is a self acting bronze pressure reducing valve suitable for water and air, approved for domestic use to protect water heaters and domestic systems. It is available in ½” & ¾” and the main materials are DR brass body, NBR diaphragm and seat. It can be adjusted between 100-600 kpa and is factory pre-set to reduce the downstream pressure to 500 kpa. A ¼” gauge port is standard and allows a pressure gauge to be fitted directly to the valve.
Maximum inlet pressure - 1600 kpa (230psi)
Maximum temp- 60°C
Reduced pressure ranges: 100-600 kpa
Options: Pressure Gauge
Read More...
Model 5350 DR Bronze Presure Reducing Valve (with dial-up pressure indicator)
Caleffi model 5350 is a self acting bronze pressure reducing valve suitable for water. It can be set prior to installation as it has an adjustment knob with a pressure setting indicator. It is available in ½” → 2” and the main materials are DR brass body, NBR diaphragm and seat. A ¼” gauge port is standard and allows a pressure gauge to be fitted directly to the valve. Male unions are supplied as standard.
Maximum inlet pressure-2500 kpa (362 psi)
Maximum temp- 60°C
Reduced pressure range - 100-600 kpa
JR-Series -HP Instrument Style Pressure Regulator
Jordan JR-series line of instrument style regulators have the ability to handle very high pressures (3,600psi), large differential pressures and very low flows (Cv’s 0.012-0.8). These valves are typically used in research and sampling systems for corrosive gases and liquids. Typical applications would be gas and liquid chromatography and flame ionization detectors as well as other high pressure industrial applications. Standard body material is 316L with exotics like Hastelloy or Monel as options. Seats options are PTFE or PEEK. The JR-series can handle inlet pressures up to 3,600 psi (248 bar) and have a number of reduced pressure ranges:
JR reduced pressure ranges: 5-50 psi, 25-100 psi, 50-150 psi, 25-250 psi, 100-475 psi, 200-750 psi
JR Sizes: ¼” (DN8); 3/8” (DN10); 1/2” (DN15); Cv's 0.012; 0.08; 0.20
JRH reduced pressure ranges: 2-10psi, 5-20psi, 15-100psi, 50-175psi, 75-450 psi
JRH Sizes: 3/8” (DN10); 1/2” (DN15); Cv 0.8
Read More...
Model RET Pressure Reducing Valve (316ss, screwed)
Elite model RET is a 316ss self acting pressure reducing valve suitable for fluids, air and steam.
It is available in ½” → 2” (Cv's from 2.4-25.0) and the main materials are 316ss with NBR or Viton diaphragm and seals. Valve has threaded ends, BSP female
Maximum inlet pressure-2500 kpa (362 psi)
Maximum temp- 100°C or 180°C for steam
Reduced pressure ranges - 100-600 kpa; 400-1,000 kpa; 800-1300 kpa
Options: NPT, all 316ss adjusting bolt/locknut, pressure gauge
Read More...
