Burkert Series 6519 Pilot Solenoid Valve (Namur)
5/2-way (for double acting) and 3/2-way (for single acting) Solenoid Valve with Namur interface for direct mount to pneumatically actuated process valves, servo-assisted, PA body, NBR seals, 32 mm wide, DN 6, 8 and 9, flow rates 900 and 1300 l/min, manual override standard. *DIN cable plug must be ordered separately*
Voltages stocked as follows:-
ID 131421B (Namur, 1/4” BSP, with 6mm orifice) – 24vDC
ID 131421C (Namur, 1/4” BSP, with 6mm orifice) – 24vAC
ID 131421D (Namur, 1/4” BSP, with 6mm orifice) – 110vAC
ID 131421E (Namur, 1/4” BSP, with 6mm orifice) – 230vAC
* Options: EExm, EExi, non-namur (threaded ¼” port) connection for remote installation, brass or st/steel inserts, can be used individually or in blocks.
Burkert Series 6519 Pilot Solenoid Valve (Free Standing)
Burkert series 6519: 5/2-way (for double acting actuator) free standing pilot Solenoid Valve with threaded connection for remote installation. PA body, NBR seal, brass threaded inserts, ¼” BSP female, 8mm orifice, air flow rates to 1300 l/min, pressure range 2→8 Bar, complete with manual override
*DIN cable plug must be ordered separately*
ID 132465- 24vDC (2W)
ID 132468-240vAC (6VA/2W)
* Options: St/steel threaded inserts, FKM seals, cable plug with st/steel pins, LED indicator, rectifier
Model 0330 2/2 or 3/2-way Solenoid Valve (free standing)
Burkert series 0330: 2/2-way or 3/2-way, direct acting pilot Solenoid Valve with threaded connection. Suitable for neutral gases and fluids, as well as contaminated fluids (has isolating diaphragm).
Brass or Stainless steel body, NBR or FKM seal (EPDM/FFKM optional), ¼” BSP female connection, normally open or closed circuit function, 2→2.5mm→4.0mm orifice, pressure ranges 0→5 Bar, 0→10 Bar, 0→12 Bar (depends on voltage, orifice size and circuit function voltages 24vDC, 24vAC, 240vAC, manual override standard)
Model 6014 3/2-way Solenoid Valve (free standing/sub-base)
Burkert series 6014: 3/2-way, direct acting pilot Solenoid Valve with threaded or sub-base connection. Suitable for neutral gases and fluids. Brass, Stainless steel or Polyamide body (sub-base), FKM seal (EPDM optional), ⅛” or ¼” BSP female connection, normally open or closed circuit function, 1.5→2.5mm orifice, pressure ranges 0→6 Bar, 0→7 Bar, 0→10 Bar or 0→16 Bar (depends on voltage, orifice size and circuit function voltages 24vDC, 24vAC, 240vAC)
* Options: Manual override, banjo connection, timer unit
Elite model BTE/BFE Solenoid Operated Control Valve
Elite model BTE/BFE uses a MFV (multi-function valve) as the main valve and is fitted with a Burkert 331-D 3/2-way solenoid valve as the pilot.
It is available in BTE threaded version 1½”→ 2” (Cv’s 48-75) and BFE flanged version in 2”-14” (Cv’s 75-3,000) and the choice of materials for the main valve are cast or ductile iron with bronze trim, bronze, 304ss or 316ss. Diaphragm and seat material can be either NBR or Viton and the pilot valve can be bronze or stainless steel. Flanged valves (2”-14”) can be drilled to suit Ansi 150# or AS Table D/E.
Maximum inlet pressure-1,000 kpa (145 psi)
Maximum temp- 80°C