Pilot Solenoid Valve
-
MNF 532 Single Coil Pilot Solenoid Valve ( Namur)
-
5/2-way or 5/3-way Bi-stable Solenoid Valve with Namur interface for direct mount to pneumatically actuated process valves, anodized aluminium body, NBR seals, manual override standard, ¼” connection-available in 12vDC, 24vAC, 24VDC, 115vAC, 230vAC
-
MNI 532 Dual Coil Pilot Solenoid Valve (Bi-stable, Namur)
-
5/2-way or 5/3-way Bi-stable Solenoid Valve with Namur interface for direct mount to pneumatically actuated process valves, anodized aluminium body, NBR seals, manual override standard, ¼” connection-available in 12vDC, 24vAC, 24VDC, 115vAC, 230vAC
* Options: Ex rated (Eexia, Eexm)
-
Burkert Series 6519 Pilot Solenoid Valve (Namur)
-
5/2-way (for double acting) and 3/2-way (for single acting) Solenoid Valve with Namur interface for direct mount to pneumatically actuated process valves, servo-assisted, PA body, NBR seals, 32 mm wide, DN 6, 8 and 9, flow rates 900 and 1300 l/min, manual override standard. *DIN cable plug must be ordered separately*
Voltages stocked as follows:-
ID 131421B (Namur, 1/4” BSP, with 6mm orifice) – 24vDC
ID 131421C (Namur, 1/4” BSP, with 6mm orifice) – 24vAC
ID 131421D (Namur, 1/4” BSP, with 6mm orifice) – 110vAC
ID 131421E (Namur, 1/4” BSP, with 6mm orifice) – 230vAC* Options: EExm, EExi, non-namur (threaded ¼” port) connection for remote installation, brass or st/steel inserts, can be used individually or in blocks.
-
Burkert Series 6519 Pilot Solenoid Valve (Free Standing)
-
Burkert series 6519: 5/2-way (for double acting actuator) free standing pilot Solenoid Valve with threaded connection for remote installation. PA body, NBR seal, brass threaded inserts, ¼” BSP female, 8mm orifice, air flow rates to 1300 l/min, pressure range 2→8 Bar, complete with manual override
*DIN cable plug must be ordered separately*ID 132465- 24vDC (2W)
ID 132468-240vAC (6VA/2W)* Options: St/steel threaded inserts, FKM seals, cable plug with st/steel pins, LED indicator, rectifier
-
Pneumatic Solenoid Valve Bank
-
Valve Banks are available with 3/2 Solenoid Valves (for Spring Return Actuators) or 5/2 (for Double Acting Actuators). The assembly comprises model 8640 Solenoid Valves (each capable of 300 lpm) with 6mm push-in connections and a choice of 6, 12, 18 or 24 valves in the one bank. The service connection to the valve bank is 10mm push-in. Voltage 24vDC/1W
* Options: Network version, 25-Pin D connection, Hot swap version
