Elite model BTF/BFF uses a MFV (multi-function valve), which is supplied with model 2856 Float Valve as the pilot (shown above but not illustrated in the photo to the left). The valve is used for controlling the level of water in a tank. The main valve is usually piped directly into the base of the tank, allowing the pilot valve to be remotely fitted inside the tank.
It is available in BTF threaded version 1½”→ 2″ (Cv’s 48-75) and BFF flanged version in 2″-14″ (Cv’s 75-3,000) and the choice of materials for the main valve are cast or ductile iron with bronze trim, bronze, 304SS or 316SS. Diaphragm and seat material can be either NBR or Viton and the pilot valve can be 304SS/PE float or 316SS Ball/Float. Valve has either threaded ends (1½”→ 2″) or flanged ( ½”-6″) which can be drilled to suit Ansi 150# or AS Table D/E.
Note 1: A minimum water supply pressure of 30 kpa is recommended
Note 2: Actual WP must be advised so that the right diameter float is selected
Maximum inlet pressure- CI (12 Bar) BZ (16 Bar) DI (20 Bar) SS (25 Bar)
Min/Max Temp Range: -15°C → +80°C